The 1x4 HDBaseT splitter is an advanced signal distribution amplifier that can distribute one HDMI signal to four HDBaseT outputs each up to 230ft/70m through a single Cat6/6a cable. Max video resolution up to 4K2K@60Hz(4:4:4). A local HDMI loop out can allow two units cascading to a 1x8 splitter. Bio-lateral IR and RS-232 are supported as well.
-HDMI 2.0b, HDCP 2.2 compliant.
-Up to 4K2K@60Hz (4:4:4) 18Gbps.
-Color Depth: 10-bit, 12-bit;
-Color space: RGB/YCbCr 4:4:4, YCbCr 4:2:2
-Supports all HDMI audio formats pass-through.
-HDBaseT up to 230ft/70m through a single Cat6/6a cable
-RS-232 and two-way IR supported
-Local HDMI loop out for cascading usage
-24V POC on all HDBaseT ports
-Transmission distance: ※Over CAT6 cable
70 meters: 1080P @60Hz 36bit;
40 meters: 1080P @60Hz@48bit; 1080P @120Hz@24bit; 4K2K@50/60Hz (YUV420), 4K2K@50/60Hz (YUV444)
-POC (Power over Cable), either TX or RX is powered by one 24V@2.7A power supply.
-Bi-directional infrared control
① 1x 1×4 HDBaseT Splitter
② 4x HDBaseT Receivers
③ 4x Wideband IR Blaster cables
④ 4x Wideband IR Receiver cables
⑤ 1x 24V/2.7A Locking Power Adapter
⑥ 5x Phoenix connectors (5 pins male)
⑦ 4x Phoenix connectors (3 pins male)
⑧ 1x User Manual
Input ports: 1x HDMI Type A [19-pin female]
5x IR INPUT [Phoenix jack]
Output ports: 1x HDMI Type A [19-pin female]
5x RS-232 [Phoenix jack]
5x IR OUTPUT [Phoenix jack]
4x HDBaseT Out [RJ45]
1x LAN [RJ45, Control]
Input ports: 1×HDBaseT In [RJ45]
1×IR In [3.5mm Stereo Mini-jack]
Output ports: 1×HDMI Type A [19-pin female]
1×IR Out [3.5mm Stereo Mini-jack]
1×RS-232 [Phoenix connector]