This is a professional condenser microphone. It uses hardcover circuit control and a large gold-plated diaphragm. It has a directivity and a heart shape. It also features high output and low noise. These features make the microphone capture the most subtle. The sound is especially suitable for recording studios, recording studios, radio stations, and stage performance recordings, and can definitely meet the requirements of radio recording and other occasions.
Specs.:
Directivity: one-way
Frequency response: 20Hz-20kHz
Sensitivity: -34dB ± 2dB (0dB-1V / Pa at 1kHz)
Output impedance: 150Ω ± 30% (at 1kHz)
Load impedance: ≥1000Ω
Level Noise Level: 16dBA
Maximum sound pressure level: 130dB (at 1kHz≤1% T.H.D)
Signal to noise ratio: 78dB
Current consumption: 3mA
Unit weight: 346 grams
Unit size: φ46 * 150mm
Instructions for use:
1. When using, you should first adjust the volume control of the loudspeaker or mixer to the minimum, then connect the phantom power to the microphone, and then turn on the phantom power switch, and slowly adjust the volume from small to large to appropriate to avoid Horn is hit
2. Cover the microphone part with your hand, or bring the microphone close to the speaker, howling noise may be generated. In this case, first reduce the volume, pull away from the speaker, and try to make the different speakers of the microphone oppose each other.
3. The microphone has high sensitivity, so care must be taken not to drop it from a high place or give a strong impact.
4. The microphone should be stored in a relatively clean place during use, avoiding storage or use in places with high temperature and humidity, so as not to affect the sensitivity and tone